Advantages and Features:
1. The LCD intuitively displays solar charging and battery status, and users can know the system running status in real time.
2. In the working environment temperature (-15°C~50C), it can run continuously at full load with rated charging current.
3. Stage PWM charging: strong charge, boost, float charge.
4. Four types of battery charging programs are available: lithium battery, gel, open type and user mode.
5. Adopt liquid crystal display design to dynamically display the operating data and working status of the equipment.
6. It has the functions of overcharge, overdischarge, overload and lightning protection to improve the reliability, safety and practicability of the system.
7. Humanized key setting, the operation is more comfortable and convenient.
8. PWM charging mode control, DC mode, low cost.
What is the wiring sequence of the controller?
1. When wiring, connect the battery first and then the battery board. Be careful not to reverse the polarity. When you need to remove the wiring, first remove the battery board, and then remove the battery wiring.It is forbidden to open the battery.
2. Connect the battery: pay attention to 10, one pole, do not connect reversely. If the connection is correct, turn on the POWER switch, the LCD screen will display, otherwise, you need to check whether the connection is correct.
3. Connect the solar panel: pay attention to the tenth, one pole, do not connect it in reverse, if there is sunlight, turn on the SOLAR switch, the LCD screen will display the solar voltage, otherwise, you need to check whether the connection is correct.